Yamumzbum
Curing
- User ID
- 1301
I mix a crap load of nutrients.
Well it definitely feels like it since I'm constantly doing it and I'll tell you why.
Due to the waymy system is set up when I fill the rezi a large portion runs through the lines and begins filling the bottom of the pots so the capacity essentially doubles or perhaps even triples, that's beside the point, if I fill the rezi with fresh water first until it reaches the 80 litre mark (keep in mind what's also in the pots and lines) and then add nutes I can't account for the extra water in the rest of the system, only the 80 litres in the rezi so what happens is when the nutrient solution gets fed to plants and drains through, what comes back into the rezi is the fresh zero EC water which was in the lines from filling the rezi.
So what I do I fill my what feels like a very small 30 litre bucket with fresh water from my water tank, chuck a water pump in to do the mixing coz I'm a lazy prick, chick in silica which most of you synthetic chaps would know and if you don't you should, the silica goes in first since it has nil effect on the EC and also takes the most time to dilute and should be mixed for an hour if possible by itself in the water.
Then I chuck in calmag, check EC, chuck in part A base nutes, wait 15 minutes, chuck in part B base, check EC and then there's the micro is it or macro or those supplemental ingredients like rooter boosters n Amino acids and pk boosters and everything else that's available.
Shit I'm outa breath.
So that's 30 litres done... Only another 120 more to go ffs.
Any better ideas??
Bigger bucket maybe
Well it definitely feels like it since I'm constantly doing it and I'll tell you why.
Due to the waymy system is set up when I fill the rezi a large portion runs through the lines and begins filling the bottom of the pots so the capacity essentially doubles or perhaps even triples, that's beside the point, if I fill the rezi with fresh water first until it reaches the 80 litre mark (keep in mind what's also in the pots and lines) and then add nutes I can't account for the extra water in the rest of the system, only the 80 litres in the rezi so what happens is when the nutrient solution gets fed to plants and drains through, what comes back into the rezi is the fresh zero EC water which was in the lines from filling the rezi.
So what I do I fill my what feels like a very small 30 litre bucket with fresh water from my water tank, chuck a water pump in to do the mixing coz I'm a lazy prick, chick in silica which most of you synthetic chaps would know and if you don't you should, the silica goes in first since it has nil effect on the EC and also takes the most time to dilute and should be mixed for an hour if possible by itself in the water.
Then I chuck in calmag, check EC, chuck in part A base nutes, wait 15 minutes, chuck in part B base, check EC and then there's the micro is it or macro or those supplemental ingredients like rooter boosters n Amino acids and pk boosters and everything else that's available.
Shit I'm outa breath.
So that's 30 litres done... Only another 120 more to go ffs.
Any better ideas??
Bigger bucket maybe
