New young member

[Aequita]

Hello all, finally decided to start growing in my closet with 2 90x50x160cm tents, a raxial S8 and a MarsTS600 and 1000, picked up some soil from the shop here (might grab some more as well) alongside some northern lights x Malawi ducksfoot and the 90's whore candy from wavy genetics. I will start the grow log when everything arrives but it'll be a very tight grow.

Beyond that I enjoy VR, World of Warcraft, 3D printing, cooking and vaporizers (VAS a bitch)

Bit more diy inclinated at times but can be a lazy cunt at times so fingers crossed this grow gives me some accountability for that part of me.

 

[Sedge]

Welcome along.

 

[Anoma]

Welcome, bud. There's a lot of knowledgeable people here so if you have any questions then don't be shy.

You'll be up and running in no time with some of the information here.

 

[RiverRat]

Welcome man. Appreciate the extra mile on the intro

 

[Aequita]

Thankyou all, I've done the research numerous times over the years to get started and as you can always tell for some it's a bit daunting to even start but I've gone over it over again and absorbed it mostly, not gonna go overly fancy but will pay as much attention as I can, everything will probably start coming together within the next 2 weeks or so and upto a month to be fully setup.
Can't wait

 

[Old fox]

Thankyou all, I've done the research numerous times over the years to get started and as you can always tell for some it's a bit daunting to even start but I've gone over it over again and absorbed it mostly, not gonna go overly fancy but will pay as much attention as I can, everything will probably start coming together within the next 2 weeks or so and upto a month to be fully setup.
Can't wait

Pictures or it didn't happen...haha Welcome buddy, enjoy your first grow.

 

[Gazza]

Hi mate, can’t print me up an AR-15 by any chance ?

 

[Aye Shroomer]

Welcome mate. For what not to do be sure to check out my attempts lol

 

[Aequita]

Hi mate, can’t print me up an AR-15 by any chance ?

Know someone that can machine tubes, springs and a mate with black market plans and we might get that going

Welcome mate. For what not to do be sure to check out my attempts lol

Will do!

 

[Dotts]

Welcome along mate!

Hope ya don't get put off growing with that fan n light...

Make sure ya talk to afew members here before ya upgrades...

Ps: don't let Porky talk ya into getting another LED lol

 

[Aequita]

Welcome along mate!

Hope ya don't get put off growing with that fan n light...

Make sure ya talk to afew members here before ya upgrades...

Ps: don't let Porky talk ya into getting another LED lol

I'm definitely space constrained in an apartment so hence the small tent, with some scrogging, and promoting upward growth looks like my main goal for it, 160cm clearance ain't much but I can run the fan outside, go full negative pressure hopefully to manage airflow, dunno where to dump the air for stealth since the top is a different section, possibly some cutting into and all that up there, so many ideas floating in my head right now

 

[R3za92]

Hi mate, can’t print me up an AR-15 by any chance ?

Technically it is possible, being in possession of the plans though is a pretty serious firearms charge. The yanks and shit have actually got pretty into 3d printed firearms and there’s a few like the fgc that are almost entirely 3d printed semi autos.

 

[Dotts]

Yeah mate! Gotta do what ya can do, starting is the hard bit!

As long as ya growing is all that counts!

On a side note, I have an occulas Quest 2,
Fun when ya baked for sure!

 

[Indy]

Should try the Mclaren 720s GT3 at Bathurst in VR. Pretty exhilarating when you nail a good lap.

Welcome, Aequita.

 

[Ganja Kaiser]

don't let Porky talk ya into getting another LED lol

What's wrong with LED? My diablos are great

 

[Ganja Kaiser]

Hello all, finally decided to start growing in my closet with 2 90x50x160cm tents, a raxial S8 and a MarsTS600 and 1000, picked up some soil from the shop here (might grab some more as well) alongside some northern lights x Malawi ducksfoot and the 90's whore candy from wavy genetics. I will start the grow log when everything arrives but it'll be a very tight grow.

Beyond that I enjoy VR, World of Warcraft, 3D printing, cooking and vaporizers (VAS a bitch)

Bit more diy inclinated at times but can be a lazy cunt at times so fingers crossed this grow gives me some accountability for that part of me.

Welcome mate. Nice intro. Wouldn't mind hearing more about your 3d printing. Interested in the subject. Good luck with your grow. I'm just about finished my first one and in soil.

 

[Red Eye Hero]

plans to build your own gun

3D gun print DEFCAD MEGA PACK v3 with updates zip (download torrent) - TPB

Download 3D gun print DEFCAD MEGA PACK v3 with updates zip torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

AR-15 3D CAD Model and Blueprints V1.1 - Deterrence Dispensed (download torrent) - TPB

Download AR-15 3D CAD Model and Blueprints V1.1 - Deterrence Dispensed torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

Glock 17 Gen3 3D-Printed Frame V1.0 - Deterrence Dispensed (download torrent) - TPB

Download Glock 17 Gen3 3D-Printed Frame V1.0 - Deterrence Dispensed torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

The Pirate Bay - The galaxy's most resilient bittorrent site

Search for and download any torrent from the pirate bay using search query gun. Direct download via magnet link.

piratebay.party

 

[Aequita]

Welcome mate. Nice intro. Wouldn't mind hearing more about your 3d printing. Interested in the subject. Good luck with your grow. I'm just about finished my first one and in soil.

I've been spending months on off making some VR haptic gloves (whole reason why I bought the 3d printer) basically when I cbf testing it cause it's pretty much diy with string and a potentiometer, arduino and some soldering and loading code onto it, there's a few vids floating around on youtube about it but inbetween that, moving, lockdown cbfs and all I've been slow to move on it currently, I've made some small things like 18mm to 10mm adapters for my glass which work amazing with my vapes, printed some vases to give to friends and pot plants, some clips for milk crates for my friends milk crate furniture.

 

[R3za92]

plans to build your own gun

3D gun print DEFCAD MEGA PACK v3 with updates zip (download torrent) - TPB

Download 3D gun print DEFCAD MEGA PACK v3 with updates zip torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

AR-15 3D CAD Model and Blueprints V1.1 - Deterrence Dispensed (download torrent) - TPB

Download AR-15 3D CAD Model and Blueprints V1.1 - Deterrence Dispensed torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

Glock 17 Gen3 3D-Printed Frame V1.0 - Deterrence Dispensed (download torrent) - TPB

Download Glock 17 Gen3 3D-Printed Frame V1.0 - Deterrence Dispensed torrent or any other torrent from the Other Physibles. Direct download via magnet link.

piratebay.party

The Pirate Bay - The galaxy's most resilient bittorrent site

Search for and download any torrent from the pirate bay using search query gun. Direct download via magnet link.

piratebay.party

It’s only illegal once you actually download the files. They’re freely available though.

 

[Red Eye Hero]

Theses are cool too lst clips (low stress training)

90 degree LST clip

Organize and optimize your plants growth. Low-stress training.

cults3d.com

Topsy Micro by TopsyMicro

08/18/2021 UPDATE! Want to show your support for the project or just buy me a coffee? You all seem to really love the design! Be sure to tag me @topsymicrogrow in your grow photos! I would love to see your plants! I would like to thank everyone for the feedback that I have received on...

www.thingiverse.com

And a Death Star weed grinder

Death Star Grinder by 3Dash

Death Star grinder with small tripod preventing it from rolling away. It consists of 6 3D printed parts, including the display stand, and some electronics I extracted from a small flash light.Most of the parts are screwed together except for the upper and lower part of the grinder these are held...

www.thingiverse.com